GET DC 5V 10A 4 8 Channel Relay Module Micro USB Board With Indicator PC Upper Computer ICSE014A Software Control
• The module have MICRO USB and serial port , so they can communicate with PC and other device c onveniently .
• The normal working voltage for modules is 5V. And module of ICSE014A have a p ower interface of 5V. Parameters are as follows:
channel count of module
w orking current
i nput voltage
whether have serial port
baud rate of serial port
Module control frequency
W hether have power interface
Modules all have Micro USB and serial port . Read following for details :
• Micro USB: andard micro USB mother mouth .
• TX : Transmit
• RX : Receive
• 5V : Volt c urrent c ondenser
• GND : Ground
• Power Interface : Only ICSE014A have . Interface is used when Micro USB cannot give enough power.
1.USB usage method Module cont with PC through USB . The conon method is as follows:
Then open ” Relay Board Manager ” to operate the module . Read ” RelayBoardManager_Reference” for details of the software.
2. Serial port usage method Module can communicate with other device directly through serial port . Module can receive single byte from upper monitor ( baud rate 9600) : Upper Monitor 0x50 0x51 ICSE012A 0xAB ICSE013A 0xAD ICSE014A 0xAC Module will turn to normal work ate after receive “ 0x51 ” . Then every data byte will control the relay directly . Each bit controls a realy ( ‘ 0 ‘ mark art , ‘ 1 ‘ mark op ) . Read following for details: B it
bestygoods.com & TronikSop application are the fastest growing online electronics components store . Our aim is to fulfill our customers’ needs better than anyone else and to use modern technologies.We are a very good online electronics components shopping solution, which also provides lab facility for students and hobbyists to actually practice their skills and create projects by using our own electronics components lab